Isopentane, also known as 2-methylbutane, is a colorless, highly volatile hydrocarbon with the molecular formula C₅H₁₂ and CAS number 78-78-4. Its low boiling point of approximately 28°C makes it useful in foam manufacturing, polymer processing, and other applications that rely on evaporation and heat transfer.
For industrial buyers, selecting Isopentane involves more than checking nominal purity. The intended application, impurity limits, blend composition, and handling requirements all influence which product is suitable.
Junyuan offers Isopentane, 99% and Isopentane, 95%, alongside pentane-based blowing-agent blends. The required grade should be confirmed against the customer’s process specification.
Chemical Structure and Physical Properties
Isopentane is a branched-chain alkane with the condensed structural formula CH₃–CH(CH₃)–CH₂–CH₃.
Normal pentane, or n-Pentane, has a straight-chain structure. Although both compounds share the formula C₅H₁₂, their different molecular arrangements give them different physical properties, including boiling point and vapor pressure.
| Property | Typical Reference Value |
|---|
| Chemical name | Isopentane |
| Alternative name | 2-Methylbutane |
| CAS number | 78-78-4 |
| Molecular formula | C₅H₁₂ |
| Molecular weight | Approximately 72.15 g/mol |
| Appearance | Clear, colorless liquid |
| Normal boiling point | Approximately 28°C |
| Freezing point | Approximately −160°C |
| Liquid density | Approximately 0.62 g/mL at 20°C |
| Vapor pressure | Approximately 79 kPa at 20°C |
| Water solubility | Practically insoluble |
| Flash point | Below −50°C; reported values depend on the test method |
These values describe the chemical’s typical properties, not a guaranteed commercial specification. Refer to the applicable product specification, Safety Data Sheet, and batch Certificate of Analysis.
Isopentane evaporates readily below its normal boiling point. Its vapor is heavier than air and may travel along the ground or accumulate in poorly ventilated areas.
How Is Isopentane Produced?
Commercial Isopentane is recovered from petroleum and natural-gas processing streams or produced through catalytic isomerization.
Separation from Hydrocarbon Streams
Isopentane occurs in natural-gas liquids and petroleum-derived fractions. Fractional distillation separates these hydrocarbons according to their boiling behavior, allowing Isopentane to be recovered and purified.
Catalytic Isomerization
Normal pentane can be converted into Isopentane by rearranging its carbon skeleton over a catalyst. The molecular formula remains C₅H₁₂, but the structure changes from a straight chain to a branched chain.
For buyers, the production route provides useful background. Product approval should focus on the supplied composition, relevant impurity limits, and batch consistency.
Main Uses of Isopentane
Foam Blowing Agents and Insulation Manufacturing
Isopentane is used as a physical blowing agent in expandable polystyrene (EPS) and polyurethane (PU) foam applications. During processing, it vaporizes and helps create the foam’s cellular structure.
Junyuan’s Isopentane, 95% is offered for foam-blowing applications. Isopentane is also supplied in blends with other hydrocarbons to adjust processing behavior.
Relevant blend families include:
The appropriate blend depends on the foam formulation, production equipment, operating conditions, and finished-product requirements. When specifying a blend, identify the component order and whether the ratio is expressed by mass or volume.
Polyethylene Manufacturing
High-purity Isopentane is used as an induced condensing agent in suitable gas-phase polyethylene processes. In condensing-mode operation, it contributes to removing reaction heat.
Product suitability depends on more than Isopentane content. Water, sulfur, unsaturated compounds, and other trace impurities may be relevant to the process and catalyst system.
For these applications, review the specification for Isopentane, 99% against the plant’s approved requirements. A foam-blowing grade should not automatically be treated as suitable for polyethylene production.
Laboratory Tissue Freezing
Pre-cooled Isopentane is used for rapid freezing of biological tissue before cryosectioning and other laboratory analyses. It may be cooled using liquid nitrogen or dry ice under an established laboratory procedure.
This application requires controls for both flammable liquids and low-temperature handling. Product grade, equipment, ventilation, and specimen-storage procedures should follow the laboratory’s validated protocol.
Binary-Cycle Geothermal Power Generation
Isopentane can serve as a working fluid in binary-cycle geothermal power plants.
Geothermal water transfers heat to the working fluid through a heat exchanger. The Isopentane vaporizes, drives a turbine, and is then condensed for reuse in the cycle.
Its low boiling point allows heat recovery from geothermal resources that may not be suitable for conventional steam-based power generation.
How Does Isopentane’s Boiling Point Affect Foam Manufacturing?
Isopentane’s low boiling point helps it vaporize as the foam system heats up. However, effective foaming requires vapor generation to match the development of the polymer structure.
At a given temperature, Isopentane vaporizes more readily than n-Pentane or Cyclopentane. Changing its proportion in a blend can therefore affect the expansion profile and cell formation.
The normal boiling point is not a fixed “foaming-start temperature.” Pressure, dissolution in the formulation, blend composition, and temperature history all influence actual vaporization.
Cell Pressure and Dimensional Stability
Blowing-agent selection also affects the foam after expansion. As the product cools, the behavior of the gas inside the cells influences internal pressure and dimensional stability.
Cyclopentane/Isopentane blends can help balance easier vaporization with insulation and cell-pressure requirements. No single blend ratio is suitable for every formulation or production line.
Blowing Efficiency
A lower boiling point does not automatically mean more gas per kilogram.
Isopentane and n-Pentane have the same molecular weight. Equal masses therefore produce essentially the same theoretical gas volume when fully vaporized at the same temperature and pressure.
Actual manufacturing efficiency depends on how effectively the blowing agent contributes to usable foam. Relevant measures include:
- Blowing-agent consumption
- Finished density
- Cell structure
- Processing consistency
- Dimensional stability
- Thermal conductivity
- Reject rate
Compare blowing agents against the same finished-product requirements rather than judging performance only by initial expansion or purchase price.
Isopentane vs n-Pentane vs Cyclopentane
These hydrocarbons are frequently compared in foam manufacturing, but they have different structures and evaporation characteristics.
| Comparison | Isopentane | n-Pentane | Cyclopentane |
|---|
| CAS number | 78-78-4 | 109-66-0 | 287-92-3 |
| Molecular formula | C₅H₁₂ | C₅H₁₂ | C₅H₁₀ |
| Structure | Branched chain | Straight chain | Ring |
| Normal boiling point | Approximately 28°C | Approximately 36°C | Approximately 49°C |
| Relative volatility at a common temperature | Highest of the three | Intermediate | Lowest of the three |
| Foam-related role | Adjusting vaporization and expansion behavior | Used in pentane blowing-agent systems, including EPS blends | Widely used in rigid PU insulation foam |
Isopentane and n-Pentane are structural isomers. Cyclopentane is not a pentane isomer because its molecular formula is C₅H₁₀ rather than C₅H₁₂.
For related single-component products, review n-Pentane, 95% and Cyclopentane, 95%. Product selection should follow the required composition and process specification rather than nominal purity alone.
Replacing one hydrocarbon with another should not be treated as a direct substitution without evaluating the formulation and process.
What Are the Three Pentane Isomers?
The three structural isomers of C₅H₁₂ are n-Pentane, Isopentane, and Neopentane.
| Isomer | Alternative Name | Approximate Boiling Point |
|---|
| n-Pentane | Normal pentane | 36°C |
| Isopentane | 2-Methylbutane | 28°C |
| Neopentane | 2,2-Dimethylpropane | 9.5°C |
Neopentane is a gas at ordinary room temperature and atmospheric pressure. It is therefore not a directly interchangeable ambient-pressure liquid alternative to n-Pentane or Isopentane.
Safety, Storage, and Handling
Isopentane is an extremely flammable liquid and vapor. Inhalation may cause drowsiness or dizziness, and swallowing presents a serious aspiration hazard if the liquid enters the airways.
Its reported flammable range is approximately 1.4–7.6% by volume in air. Vapor can accumulate in pits, trenches, drains, and enclosed equipment spaces.
Vapor and Ignition Control
- Use closed handling systems and effective ventilation.
- Keep away from heat, sparks, open flames, and uncontrolled hot work.
- Use electrical equipment suitable for the assessed hazardous area.
- Assess low-level spaces where heavier-than-air vapor may collect.
- Do not rely on odor to determine whether an area is safe.
Static Control During Transfer
Use approved bonding and grounding arrangements to control static-electricity hazards. Connections, hoses, and transfer equipment should be inspected and tested under the site’s operating procedures.
Bonding and grounding requirements must be established for the actual equipment and applicable standards rather than based on a generic resistance value.
Storage and Spill Prevention
Keep approved containers tightly closed, protect them from heating, and separate them from strong oxidizing agents.
Prevent releases into drains and waterways. Spill response should be carried out by trained personnel using the site’s emergency procedures.
For firefighting, suitable media may include dry chemical powder, carbon dioxide, or appropriate foam. A solid water jet can spread burning liquid. Trained responders may use water spray for container cooling where appropriate.
Always follow the current Safety Data Sheet and applicable local requirements. This overview is not a substitute for a site-specific safety assessment.
Isopentane in Drums and ISO Tanks
Junyuan offers Isopentane, 99% and Isopentane, 95% in steel drums and ISO tanks. Packaging availability and shipment arrangements should be confirmed for the selected grade, quantity, and destination.
When requesting a quotation, provide the intended application and specification alongside the commercial details.
| Information | What to Specify |
|---|
| Application | Foam manufacturing, polyethylene production, or another intended use |
| Product | Isopentane grade or named blowing-agent blend |
| Composition | Required purity or blend ratio and its measurement basis |
| Impurity requirements | Applicable limits for water, sulfur, and other relevant components |
| Quantity | Trial order, shipment quantity, or estimated regular consumption |
| Packaging | Steel drums or ISO tank |
| Destination | Delivery location or destination port |
| Documentation | Required specification, SDS, COA, and shipment documents |
| Qualification | Sample testing or production-trial requirements |
Frequently Asked Questions
Is Isopentane the Same as n-Pentane?
No. They share the molecular formula C₅H₁₂ but have different structures. Isopentane is branched and boils at approximately 28°C, while n-Pentane is straight-chain and boils at approximately 36°C.
Is Cyclopentane an Isomer of Isopentane?
No. Isopentane has the formula C₅H₁₂, while Cyclopentane has the formula C₅H₁₀. They are often compared because both are used in foam manufacturing.
Can Isopentane Replace Cyclopentane Directly?
Not without evaluation. Their evaporation behavior and effects on foam processing differ. Any replacement or blend adjustment should be tested against the formulation, equipment, and finished-product requirements.
Not necessarily. The required purity and impurity limits depend on the application. A higher nominal purity does not replace confirmation that the product meets the process specification.
Which Documents Should Buyers Review?
Review the product specification or Technical Data Sheet, the current Safety Data Sheet, and the batch Certificate of Analysis. Additional documentation may be required for qualification and shipment.
For other pentane grades and formulation requirements, Junyuan also offers:
These are related products, not automatic substitutes for Isopentane. Confirm suitability against the intended application and approved specification.
Discuss Your Isopentane Requirements
Share your intended application, required specification, quantity, packaging preference, and destination with Junyuan.
For foam applications, specify whether you require Isopentane as a single component or as part of a blowing-agent blend. For polyethylene production, provide the approved process specification and relevant impurity limits so the proposed grade can be reviewed against your requirements.